Heating Services
Heating Services & Heating Engineers in South West Wales
Cold radiators, noisy pipes and heating that never quite gets going — these are the problems we sort out for homes across Swansea, Neath and Carmarthenshire. We work on domestic heating systems, from a single radiator that will not heat up to a full system upgrade.
Heating that will not heat properly
If some radiators are hot and others stay cold, the cause is usually trapped air, sludge in the system, a balancing issue or a faulty valve. We work through the system methodically rather than guessing, then balance the radiators so heat reaches the rooms that need it.
Simple fixes are treated as simple fixes. If a radiator only needs bleeding and balancing, that is what we will do.
Noisy pipes and system problems
Banging, gurgling and ticking pipework is usually air or a pump setting. Left alone, air and sludge lead to cold spots and can shorten the life of a boiler. We flush and treat systems where needed and fit magnetic filters to keep the water cleaner for longer.
We will tell you whether the system needs a proper clean or whether a smaller adjustment will do.
Heating upgrades and improvements
When a system is beyond patching, we can replace radiators, upgrade controls and fit thermostatic radiator valves so rooms can be heated individually instead of the whole house at once.
We will explain what is likely to make the biggest difference to comfort and running costs before you commit to anything.
What's included
- Cold radiator diagnosis and balancing
- Radiator valve replacement
- System flushing and magnetic filter fitting
- Heating controls and thermostatic valves
- Pump and heating component replacement
- Heating system upgrades
Talk to us
Urgent? Call rather than email.
Heating Services
Frequently asked questions
Why is my heating hot downstairs but cold upstairs?
It is usually air, a balancing problem or a pump issue rather than a failed boiler. We check the system in order and correct the cause rather than turning the pump up and hoping.
Can you fit a magnetic filter to an existing system?
Yes, provided there is a suitable place on the return pipework. Fitting one after a proper flush is the usual order of work.
Need a plumber, heating engineer or Gas Safe check?
Tell us what is happening and we will advise on the next step. For anything urgent — a leak, a burst pipe or no heating — call instead of waiting for a reply.